In retrospect, what we have studied is
AnnotationConfigApplicationContext annotationConfigApplication = new AnnotationConfigApplicationContext (MainConfig.class);
Person person2 = (Person)annotationConfigApplication.getBean("person2");The realization of these two sentences comes to the constructor implementation of annotationconfiguapplicationcontext:
public AnnotationConfigApplicationContext(Class<?>... annotatedClasses) { this(); register(annotatedClasses); refresh(); }
After reading this() and register (annotated classes), let's take a look at refresh();
I. follow up the code of refresh().
public void refresh() throws BeansException, IllegalStateException { synchronized (this.startupShutdownMonitor) { // Prepare this context for refreshing. prepareRefresh(); // Tell the subclass to refresh the internal bean factory. ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory(); // Prepare the bean factory for use in this context. prepareBeanFactory(beanFactory); try { // Allows post-processing of the bean factory in context subclasses. postProcessBeanFactory(beanFactory); // Invoke factory processors registered as beans in the context. invokeBeanFactoryPostProcessors(beanFactory); // Register bean processors that intercept bean creation. registerBeanPostProcessors(beanFactory); // Initialize message source for this context. initMessageSource(); // Initialize event multicaster for this context. initApplicationEventMulticaster(); // Initialize other special beans in specific context subclasses. onRefresh(); // Check for listener beans and register them. registerListeners(); // Instantiate all remaining (non-lazy-init) singletons. finishBeanFactoryInitialization(beanFactory); // Last step: publish corresponding event. finishRefresh(); } catch (BeansException ex) { if (logger.isWarnEnabled()) { logger.warn("Exception encountered during context initialization - " + "cancelling refresh attempt: " + ex); } // Destroy already created singletons to avoid dangling resources. destroyBeans(); // Reset 'active' flag. cancelRefresh(ex); // Propagate exception to caller. throw ex; } finally { // Reset common introspection caches in Spring's core, since we // might not ever need metadata for singleton beans anymore... resetCommonCaches(); } } }
Before we talk about this, we need to lay a foundation for it.
Event driven development in Spring
In spring, the application listener and application event multicaster are used to develop event driven development, that is, to implement observer design pattern or publish subscribe pattern.
ApplicationListener: listens for events published in the container. Whenever an event occurs, the listener's callback will be triggered to complete the event driven development. Belongs to the Observer object in the Observer design pattern.
ApplicationEventMulticaster: used to notify all observer objects, belonging to the Subject object in the observer design pattern.
Spring postprocessor
BeanFactoryPostProcessor: the implementation method of the class that inherits this can do some logical operations after the spring bean is defined but not instantiated
BeanDefinitionRegistryPostProcessor: inherit this class, its implementation method can add some bean definitions defined by ourselves before spring's bean does not load definitions
ok, now that we're done, let's go back to the code.
We've laid the groundwork, so we're going to
initApplicationEventMulticaster();
and
registerListeners();
Explain
II. initApplicationEventMulticaster in refresh().
protected void initApplicationEventMulticaster() { ConfigurableListableBeanFactory beanFactory = getBeanFactory(); if (beanFactory.containsLocalBean(APPLICATION_EVENT_MULTICASTER_BEAN_NAME)) { this.applicationEventMulticaster = beanFactory.getBean(APPLICATION_EVENT_MULTICASTER_BEAN_NAME, ApplicationEventMulticaster.class); if (logger.isDebugEnabled()) { logger.debug("Using ApplicationEventMulticaster [" + this.applicationEventMulticaster + "]"); } } else { this.applicationEventMulticaster = new SimpleApplicationEventMulticaster(beanFactory); beanFactory.registerSingleton(APPLICATION_EVENT_MULTICASTER_BEAN_NAME, this.applicationEventMulticaster); if (logger.isDebugEnabled()) { logger.debug("Unable to locate ApplicationEventMulticaster with name '" + APPLICATION_EVENT_MULTICASTER_BEAN_NAME + "': using default [" + this.applicationEventMulticaster + "]"); } } }
Very easy to understand. For an if else, first get beanfactory. Look at the source code and know that this beanfactory is the DefaultListableBeanFactory created when initializing the parent class mentioned in the previous article. Get this thing. Or around the function of this thing.
Next, judge whether there is this application? Event? Multi player? Bean? Name in beanfactory. Look at the source code:
public static final String APPLICATION_EVENT_MULTICASTER_BEAN_NAME = "applicationEventMulticaster";
Is it the listener that paves the way for knowledge? Used to notify events. Look whether it is in the container or not. If it is not, create an else and register it as a single instance. If it is, take it out of the container and assign it to the current this object, that is, our protagonist annotationconfiguapplicationcontext. The protagonist itself does not define it. This is defined in the protagonist parent class AbstractApplicationContext. Let's see:
/** Helper class used in event publishing */ private ApplicationEventMulticaster applicationEventMulticaster;
Look, there's a comment, auxiliary class: for event dispatch.
To sum up, this line of code, initApplicationEventMulticaster(), is to obtain the event notification publishing class. If not, create a single instance to put into the container and take it to the protagonist, or it will be taken directly to the protagonist. Next, look at another registerListeners();
Third, registerListeners() in refresh();
The source code is as follows:
protected void registerListeners() { // Register statically specified listeners first. for (ApplicationListener<?> listener : getApplicationListeners()) { getApplicationEventMulticaster().addApplicationListener(listener); } // Do not initialize FactoryBeans here: We need to leave all regular beans // uninitialized to let post-processors apply to them! String[] listenerBeanNames = getBeanNamesForType(ApplicationListener.class, true, false); for (String listenerBeanName : listenerBeanNames) { getApplicationEventMulticaster().addApplicationListenerBean(listenerBeanName); } // Publish early application events now that we finally have a multicaster... Set<ApplicationEvent> earlyEventsToProcess = this.earlyApplicationEvents; this.earlyApplicationEvents = null; if (earlyEventsToProcess != null) { for (ApplicationEvent earlyEvent : earlyEventsToProcess) { getApplicationEventMulticaster().multicastEvent(earlyEvent); } } }
The first for loop adds all listener s to the Multicaster (which is used to notify related events). among
String[] listenerBeanNames = getBeanNamesForType(ApplicationListener.class, true, false); for (String listenerBeanName : listenerBeanNames) { getApplicationEventMulticaster().addApplicationListenerBean(listenerBeanName); }
This is the type of ApplicationListener.class taken from the container. From the name, we can see that getbeanforty is also put in the Multicaster (it is used to notify related events). That's why we can implement the ApplicationListener interface ourselves and post @ Component annotation to notify! It's added here.
The last section is to get the early events, after which the for loop triggers the events. Let's see how it triggered.
Set<ApplicationEvent> earlyEventsToProcess = this.earlyApplicationEvents; this.earlyApplicationEvents = null; if (earlyEventsToProcess != null) { for (ApplicationEvent earlyEvent : earlyEventsToProcess) { getApplicationEventMulticaster().multicastEvent(earlyEvent); } }
Open the multicasevent method inside
@Override public void multicastEvent(ApplicationEvent event) { multicastEvent(event, resolveDefaultEventType(event)); }
public void multicastEvent(final ApplicationEvent event, ResolvableType eventType) { ResolvableType type = (eventType != null ? eventType : resolveDefaultEventType(event)); for (final ApplicationListener<?> listener : getApplicationListeners(event, type)) { Executor executor = getTaskExecutor(); if (executor != null) { executor.execute(new Runnable() { @Override public void run() { invokeListener(listener, event); } }); } else { invokeListener(listener, event); } } }
A parsing type and an invokeListener. Go in and see how the invokeListener calls
protected void invokeListener(ApplicationListener listener, ApplicationEvent event) { ErrorHandler errorHandler = getErrorHandler(); if (errorHandler != null) { try { listener.onApplicationEvent(event); } catch (Throwable err) { errorHandler.handleError(err); } } else { try { listener.onApplicationEvent(event); } catch (ClassCastException ex) { String msg = ex.getMessage(); if (msg == null || msg.startsWith(event.getClass().getName())) { // Possibly a lambda-defined listener which we could not resolve the generic event type for Log logger = LogFactory.getLog(getClass()); if (logger.isDebugEnabled()) { logger.debug("Non-matching event type for listener: " + listener, ex); } } else { throw ex; } } } }
After a close look, I find that the key point is to call listener.onApplicationEvent(event); and this onApplicationEvent is the only method of the ApplicationListener interface. In other words, as long as you implement this interface class and add @ content to the container, you will call your own code in onApplicationEvent of your implementation class!
Maybe careful students will find that the last paragraph of registerListeners you just saw is "early application events". What does this mean? In fact, it is to get and play the events that have been cached before the Multicaster was created, because the events that have come before cannot be lost. So when will there be such an early event? In fact, in the onRefresh method in the previous sentence of the registerListeners method in the refresh() code, this method has no early event by default and will be used in springboot.
So far, the registerListeners method is finished.
Next, let's talk about invokeBeanFactoryPostProcessors(beanFactory) in refresh();
IV. invokebenfactorypostprocessors (beanfactory) in refresh();
/** * Instantiate and call all beans registered in BeanFactoryPostProcessor in a clear order * <p>Must be called before singleton instantiation. */ protected void invokeBeanFactoryPostProcessors(ConfigurableListableBeanFactory beanFactory) { PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(beanFactory, getBeanFactoryPostProcessors()); // Detect a LoadTimeWeaver and prepare for weaving, if found in the meantime // (e.g. through an @Bean method registered by ConfigurationClassPostProcessor) if (beanFactory.getTempClassLoader() == null && beanFactory.containsBean(LOAD_TIME_WEAVER_BEAN_NAME)) { beanFactory.addBeanPostProcessor(new LoadTimeWeaverAwareProcessor(beanFactory)); beanFactory.setTempClassLoader(new ContextTypeMatchClassLoader(beanFactory.getBeanClassLoader())); } }
It is obvious to continue to follow up the invokeBeanFactoryPostProcessors method with the same name:
public static void invokeBeanFactoryPostProcessors( ConfigurableListableBeanFactory beanFactory, List<BeanFactoryPostProcessor> beanFactoryPostProcessors) { // Invoke BeanDefinitionRegistryPostProcessors first, if any. Set<String> processedBeans = new HashSet<String>(); if (beanFactory instanceof BeanDefinitionRegistry) { BeanDefinitionRegistry registry = (BeanDefinitionRegistry) beanFactory; List<BeanFactoryPostProcessor> regularPostProcessors = new LinkedList<BeanFactoryPostProcessor>(); List<BeanDefinitionRegistryPostProcessor> registryPostProcessors = new LinkedList<BeanDefinitionRegistryPostProcessor>(); for (BeanFactoryPostProcessor postProcessor : beanFactoryPostProcessors) { if (postProcessor instanceof BeanDefinitionRegistryPostProcessor) { BeanDefinitionRegistryPostProcessor registryPostProcessor = (BeanDefinitionRegistryPostProcessor) postProcessor; registryPostProcessor.postProcessBeanDefinitionRegistry(registry); registryPostProcessors.add(registryPostProcessor); } else { regularPostProcessors.add(postProcessor); } } // Do not initialize FactoryBeans here: We need to leave all regular beans // uninitialized to let the bean factory post-processors apply to them! // Separate between BeanDefinitionRegistryPostProcessors that implement // PriorityOrdered, Ordered, and the rest. String[] postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false); // First, invoke the BeanDefinitionRegistryPostProcessors that implement PriorityOrdered. List<BeanDefinitionRegistryPostProcessor> priorityOrderedPostProcessors = new ArrayList<BeanDefinitionRegistryPostProcessor>(); for (String ppName : postProcessorNames) { if (beanFactory.isTypeMatch(ppName, PriorityOrdered.class)) { priorityOrderedPostProcessors.add(beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class)); processedBeans.add(ppName); } } sortPostProcessors(beanFactory, priorityOrderedPostProcessors); registryPostProcessors.addAll(priorityOrderedPostProcessors); invokeBeanDefinitionRegistryPostProcessors(priorityOrderedPostProcessors, registry); // Next, invoke the BeanDefinitionRegistryPostProcessors that implement Ordered. postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false); List<BeanDefinitionRegistryPostProcessor> orderedPostProcessors = new ArrayList<BeanDefinitionRegistryPostProcessor>(); for (String ppName : postProcessorNames) { if (!processedBeans.contains(ppName) && beanFactory.isTypeMatch(ppName, Ordered.class)) { orderedPostProcessors.add(beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class)); processedBeans.add(ppName); } } sortPostProcessors(beanFactory, orderedPostProcessors); registryPostProcessors.addAll(orderedPostProcessors); invokeBeanDefinitionRegistryPostProcessors(orderedPostProcessors, registry); // Finally, invoke all other BeanDefinitionRegistryPostProcessors until no further ones appear. boolean reiterate = true; while (reiterate) { reiterate = false; postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false); for (String ppName : postProcessorNames) { if (!processedBeans.contains(ppName)) { BeanDefinitionRegistryPostProcessor pp = beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class); registryPostProcessors.add(pp); processedBeans.add(ppName); pp.postProcessBeanDefinitionRegistry(registry); reiterate = true; } } } // Now, invoke the postProcessBeanFactory callback of all processors handled so far. invokeBeanFactoryPostProcessors(registryPostProcessors, beanFactory); invokeBeanFactoryPostProcessors(regularPostProcessors, beanFactory); } else { // Invoke factory processors registered with the context instance. invokeBeanFactoryPostProcessors(beanFactoryPostProcessors, beanFactory); } // Do not initialize FactoryBeans here: We need to leave all regular beans // uninitialized to let the bean factory post-processors apply to them! String[] postProcessorNames = beanFactory.getBeanNamesForType(BeanFactoryPostProcessor.class, true, false); // Separate between BeanFactoryPostProcessors that implement PriorityOrdered, // Ordered, and the rest. List<BeanFactoryPostProcessor> priorityOrderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>(); List<String> orderedPostProcessorNames = new ArrayList<String>(); List<String> nonOrderedPostProcessorNames = new ArrayList<String>(); for (String ppName : postProcessorNames) { if (processedBeans.contains(ppName)) { // skip - already processed in first phase above } else if (beanFactory.isTypeMatch(ppName, PriorityOrdered.class)) { priorityOrderedPostProcessors.add(beanFactory.getBean(ppName, BeanFactoryPostProcessor.class)); } else if (beanFactory.isTypeMatch(ppName, Ordered.class)) { orderedPostProcessorNames.add(ppName); } else { nonOrderedPostProcessorNames.add(ppName); } } // First, invoke the BeanFactoryPostProcessors that implement PriorityOrdered. sortPostProcessors(beanFactory, priorityOrderedPostProcessors); invokeBeanFactoryPostProcessors(priorityOrderedPostProcessors, beanFactory); // Next, invoke the BeanFactoryPostProcessors that implement Ordered. List<BeanFactoryPostProcessor> orderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>(); for (String postProcessorName : orderedPostProcessorNames) { orderedPostProcessors.add(beanFactory.getBean(postProcessorName, BeanFactoryPostProcessor.class)); } sortPostProcessors(beanFactory, orderedPostProcessors); invokeBeanFactoryPostProcessors(orderedPostProcessors, beanFactory); // Finally, invoke all other BeanFactoryPostProcessors. List<BeanFactoryPostProcessor> nonOrderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>(); for (String postProcessorName : nonOrderedPostProcessorNames) { nonOrderedPostProcessors.add(beanFactory.getBean(postProcessorName, BeanFactoryPostProcessor.class)); } invokeBeanFactoryPostProcessors(nonOrderedPostProcessors, beanFactory); // Clear cached merged bean definitions since the post-processors might have // modified the original metadata, e.g. replacing placeholders in values... beanFactory.clearMetadataCache(); }
Read the logic carefully and you will find that the first half is around:
List<BeanFactoryPostProcessor> regularPostProcessors = new LinkedList<BeanFactoryPostProcessor>(); List<BeanDefinitionRegistryPostProcessor> registryPostProcessors = new LinkedList<BeanDefinitionRegistryPostProcessor>();
These two list s are continuously filtered and classified, and then invokeBeanDefinitionRegistryPostProcessors method call is made.
The second half revolves around:
List<BeanFactoryPostProcessor> priorityOrderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>(); List<String> orderedPostProcessorNames = new ArrayList<String>(); List<String> nonOrderedPostProcessorNames = new ArrayList<String>();
Three list s are added by classification, and then invokebendefinitionregistrypostprocessors method call
To sum up, the core is the logic of invokebandefinitionregistrypostprocessors. Let's take a look at:
private static void invokeBeanFactoryPostProcessors( Collection<? extends BeanFactoryPostProcessor> postProcessors, ConfigurableListableBeanFactory beanFactory) { for (BeanFactoryPostProcessor postProcessor : postProcessors) { postProcessor.postProcessBeanFactory(beanFactory); } }
Traverse the collection, call the corresponding method, and continue to view the source code:
public void postProcessBeanFactory(ConfigurableListableBeanFactory beanFactory) { int factoryId = System.identityHashCode(beanFactory); if (this.factoriesPostProcessed.contains(factoryId)) { throw new IllegalStateException( "postProcessBeanFactory already called on this post-processor against " + beanFactory); } this.factoriesPostProcessed.add(factoryId); if (!this.registriesPostProcessed.contains(factoryId)) { // BeanDefinitionRegistryPostProcessor hook apparently not supported... // Simply call processConfigurationClasses lazily at this point then. processConfigBeanDefinitions((BeanDefinitionRegistry) beanFactory); } enhanceConfigurationClasses(beanFactory); beanFactory.addBeanPostProcessor(new ImportAwareBeanPostProcessor(beanFactory)); }
Set the registration id, and then the main logic is in processConfigBeanDefinitions. Continue to view:
public void processConfigBeanDefinitions(BeanDefinitionRegistry registry) { List<BeanDefinitionHolder> configCandidates = new ArrayList<BeanDefinitionHolder>(); String[] candidateNames = registry.getBeanDefinitionNames(); for (String beanName : candidateNames) { BeanDefinition beanDef = registry.getBeanDefinition(beanName); if (ConfigurationClassUtils.isFullConfigurationClass(beanDef) || ConfigurationClassUtils.isLiteConfigurationClass(beanDef)) { if (logger.isDebugEnabled()) { logger.debug("Bean definition has already been processed as a configuration class: " + beanDef); } } else if (ConfigurationClassUtils.checkConfigurationClassCandidate(beanDef, this.metadataReaderFactory)) { configCandidates.add(new BeanDefinitionHolder(beanDef, beanName)); } } // Return immediately if no @Configuration classes were found if (configCandidates.isEmpty()) { return; } // Sort by previously determined @Order value, if applicable Collections.sort(configCandidates, new Comparator<BeanDefinitionHolder>() { @Override public int compare(BeanDefinitionHolder bd1, BeanDefinitionHolder bd2) { int i1 = ConfigurationClassUtils.getOrder(bd1.getBeanDefinition()); int i2 = ConfigurationClassUtils.getOrder(bd2.getBeanDefinition()); return (i1 < i2) ? -1 : (i1 > i2) ? 1 : 0; } }); // Detect any custom bean name generation strategy supplied through the enclosing application context SingletonBeanRegistry sbr = null; if (registry instanceof SingletonBeanRegistry) { sbr = (SingletonBeanRegistry) registry; if (!this.localBeanNameGeneratorSet && sbr.containsSingleton(CONFIGURATION_BEAN_NAME_GENERATOR)) { BeanNameGenerator generator = (BeanNameGenerator) sbr.getSingleton(CONFIGURATION_BEAN_NAME_GENERATOR); this.componentScanBeanNameGenerator = generator; this.importBeanNameGenerator = generator; } } // Parse each @Configuration class ConfigurationClassParser parser = new ConfigurationClassParser( this.metadataReaderFactory, this.problemReporter, this.environment, this.resourceLoader, this.componentScanBeanNameGenerator, registry); Set<BeanDefinitionHolder> candidates = new LinkedHashSet<BeanDefinitionHolder>(configCandidates); Set<ConfigurationClass> alreadyParsed = new HashSet<ConfigurationClass>(configCandidates.size()); do { parser.parse(candidates); parser.validate(); Set<ConfigurationClass> configClasses = new LinkedHashSet<ConfigurationClass>(parser.getConfigurationClasses()); configClasses.removeAll(alreadyParsed); // Read the model and create bean definitions based on its content if (this.reader == null) { this.reader = new ConfigurationClassBeanDefinitionReader( registry, this.sourceExtractor, this.resourceLoader, this.environment, this.importBeanNameGenerator, parser.getImportRegistry()); } this.reader.loadBeanDefinitions(configClasses); alreadyParsed.addAll(configClasses); candidates.clear(); if (registry.getBeanDefinitionCount() > candidateNames.length) { String[] newCandidateNames = registry.getBeanDefinitionNames(); Set<String> oldCandidateNames = new HashSet<String>(Arrays.asList(candidateNames)); Set<String> alreadyParsedClasses = new HashSet<String>(); for (ConfigurationClass configurationClass : alreadyParsed) { alreadyParsedClasses.add(configurationClass.getMetadata().getClassName()); } for (String candidateName : newCandidateNames) { if (!oldCandidateNames.contains(candidateName)) { BeanDefinition bd = registry.getBeanDefinition(candidateName); if (ConfigurationClassUtils.checkConfigurationClassCandidate(bd, this.metadataReaderFactory) && !alreadyParsedClasses.contains(bd.getBeanClassName())) { candidates.add(new BeanDefinitionHolder(bd, candidateName)); } } } candidateNames = newCandidateNames; } } while (!candidates.isEmpty()); // Register the ImportRegistry as a bean in order to support ImportAware @Configuration classes if (sbr != null) { if (!sbr.containsSingleton(IMPORT_REGISTRY_BEAN_NAME)) { sbr.registerSingleton(IMPORT_REGISTRY_BEAN_NAME, parser.getImportRegistry()); } } if (this.metadataReaderFactory instanceof CachingMetadataReaderFactory) { ((CachingMetadataReaderFactory) this.metadataReaderFactory).clearCache(); } }
It's relatively long. It can be divided into several parts. The first part is to create an ArrayList at the beginning. The type is bean definitionholder. Let's take a look at this:
public class BeanDefinitionHolder implements BeanMetadataElement { private final BeanDefinition beanDefinition; private final String beanName; private final String[] aliases; ....... }
As you can see, this BeanDefinitionHolder is actually a small package of BeanDefinition.
Continue to see, the following code is to take the bean name from the registry container, then take the bean definition out according to the name, and finally put the name and the bean definition into the list together, and then arrange the order. Two bean name generators are created later.
Now that you can see the point, there is a line of comments:
// Parse each @Configuration class ConfigurationClassParser parser = new ConfigurationClassParser( this.metadataReaderFactory, this.problemReporter, this.environment, this.resourceLoader, this.componentScanBeanNameGenerator, registry); Set<BeanDefinitionHolder> candidates = new LinkedHashSet<BeanDefinitionHolder>(configCandidates); Set<ConfigurationClass> alreadyParsed = new HashSet<ConfigurationClass>(configCandidates.size()); do { parser.parse(candidates); parser.validate(); ...... }while(....) .....
Here comes the core point, to analyze our configuration class! Make a do while loop to ensure that all the items in the list are parsed. Let's take a look at the parse method parser.parse(candidates). How does it parse:
public void parse(Set<BeanDefinitionHolder> configCandidates) { this.deferredImportSelectors = new LinkedList<DeferredImportSelectorHolder>(); for (BeanDefinitionHolder holder : configCandidates) { BeanDefinition bd = holder.getBeanDefinition(); try { if (bd instanceof AnnotatedBeanDefinition) { parse(((AnnotatedBeanDefinition) bd).getMetadata(), holder.getBeanName()); } else if (bd instanceof AbstractBeanDefinition && ((AbstractBeanDefinition) bd).hasBeanClass()) { parse(((AbstractBeanDefinition) bd).getBeanClass(), holder.getBeanName()); } else { parse(bd.getBeanClassName(), holder.getBeanName()); } } catch (BeanDefinitionStoreException ex) { throw ex; } catch (Throwable ex) { throw new BeanDefinitionStoreException( "Failed to parse configuration class [" + bd.getBeanClassName() + "]", ex); } } processDeferredImportSelectors(); }
There are three situations for parsing. The first one is the one where annotations can be seen from names. The second one is abstractbean definition, which is the parsing of XML configuration mode. Obviously, let's look at the first one and continue to look at the source code:
protected final void parse(AnnotationMetadata metadata, String beanName) throws IOException { processConfigurationClass(new ConfigurationClass(metadata, beanName)); }
Continue to view:
protected void processConfigurationClass(ConfigurationClass configClass) throws IOException { if (this.conditionEvaluator.shouldSkip(configClass.getMetadata(), ConfigurationPhase.PARSE_CONFIGURATION)) { return; } ConfigurationClass existingClass =this.configurationClasses.get(configClass); if (existingClass != null) { if (configClass.isImported()) { if (existingClass.isImported()) { existingClass.mergeImportedBy(configClass); } // Otherwise ignore new imported config class; existing non-imported class overrides it. return; } else { // Explicit bean definition found, probably replacing an import. // Let's remove the old one and go with the new one. this.configurationClasses.remove(configClass); for (Iterator<ConfigurationClass> it = this.knownSuperclasses.values().iterator(); it.hasNext();) { if (configClass.equals(it.next())) { it.remove(); } } } } // Recursively process the configuration class and its superclass hierarchy. SourceClass sourceClass = asSourceClass(configClass); do { sourceClass = doProcessConfigurationClass(configClass, sourceClass); } while (sourceClass != null); this.configurationClasses.put(configClass, configClass); }
When we look at the Spring source code, we can see that the real work in the Spring source code is the doXXX method, and we can see that one is finally found here.
The first step is to judge and process the configuration class. The second step is to actually process the doProcessConfigurationClass. After processing, add it to the configurationClasses, that is, the last sentence. Let's check the source code:
protected final SourceClass doProcessConfigurationClass(ConfigurationClass configClass, SourceClass sourceClass) throws IOException { // Recursively process any member (nested) classes first processMemberClasses(configClass, sourceClass); // Process any @PropertySource annotations for (AnnotationAttributes propertySource : AnnotationConfigUtils.attributesForRepeatable( sourceClass.getMetadata(), PropertySources.class, org.springframework.context.annotation.PropertySource.class)) { if (this.environment instanceof ConfigurableEnvironment) { processPropertySource(propertySource); } else { logger.warn("Ignoring @PropertySource annotation on [" + sourceClass.getMetadata().getClassName() + "]. Reason: Environment must implement ConfigurableEnvironment"); } } // Process any @ComponentScan annotations Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable( sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class); if (!componentScans.isEmpty() && !this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) { for (AnnotationAttributes componentScan : componentScans) { // The config class is annotated with @ComponentScan -> perform the scan immediately Set<BeanDefinitionHolder> scannedBeanDefinitions = this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName()); // Check the set of scanned definitions for any further config classes and parse recursively if needed for (BeanDefinitionHolder holder : scannedBeanDefinitions) { if (ConfigurationClassUtils.checkConfigurationClassCandidate( holder.getBeanDefinition(), this.metadataReaderFactory)) { parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName()); } } } } // Process any @Import annotations processImports(configClass, sourceClass, getImports(sourceClass), true); // Process any @ImportResource annotations if (sourceClass.getMetadata().isAnnotated(ImportResource.class.getName())) { AnnotationAttributes importResource = AnnotationConfigUtils.attributesFor(sourceClass.getMetadata(), ImportResource.class); String[] resources = importResource.getStringArray("locations"); Class<? extends BeanDefinitionReader> readerClass = importResource.getClass("reader"); for (String resource : resources) { String resolvedResource = this.environment.resolveRequiredPlaceholders(resource); configClass.addImportedResource(resolvedResource, readerClass); } } // Process individual @Bean methods Set<MethodMetadata> beanMethods = retrieveBeanMethodMetadata(sourceClass); for (MethodMetadata methodMetadata : beanMethods) { configClass.addBeanMethod(new BeanMethod(methodMetadata, configClass)); } // Process default methods on interfaces processInterfaces(configClass, sourceClass); // Process superclass, if any if (sourceClass.getMetadata().hasSuperClass()) { String superclass = sourceClass.getMetadata().getSuperClassName(); if (!superclass.startsWith("java") && !this.knownSuperclasses.containsKey(superclass)) { this.knownSuperclasses.put(superclass, configClass); // Superclass found, return its annotation metadata and recurse return sourceClass.getSuperClass(); } } // No superclass -> processing is complete return null; }
When I got here, I felt like seeing the real dragon... Finally, we began to analyze the common annotations. Let's take a look at some of the most commonly used @ ComponentScan annotations.
The three common spring bean configuration uses of IOC are @ ComponentScan and SpringBoot.
@Target({ElementType.TYPE}) @Retention(RetentionPolicy.RUNTIME) @Documented @Inherited @SpringBootConfiguration @EnableAutoConfiguration @ComponentScan( excludeFilters = {@Filter( type = FilterType.CUSTOM, classes = {TypeExcludeFilter.class} ), @Filter( type = FilterType.CUSTOM, classes = {AutoConfigurationExcludeFilter.class} )} ) public @interface SpringBootApplication { .... }
@ComponentScan source code
// Process any @ComponentScan annotations Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable( sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class); if (!componentScans.isEmpty() && !this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) { for (AnnotationAttributes componentScan : componentScans) { // The config class is annotated with @ComponentScan -> perform the scan immediately Set<BeanDefinitionHolder> scannedBeanDefinitions = this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName()); // Check the set of scanned definitions for any further config classes and parse recursively if needed for (BeanDefinitionHolder holder : scannedBeanDefinitions) { if (ConfigurationClassUtils.checkConfigurationClassCandidate( holder.getBeanDefinition(), this.metadataReaderFactory)) { parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName()); } } } }
The first sentence here
Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable( sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);
It is to transfer the metadata obtained from our configuration class, sourceClass, to this annotation tool class. It is to parse the @ ComponentScan annotation in the configuration class into an object, so that you can get the value set in the annotation later.
And then look back.
Set<BeanDefinitionHolder> scannedBeanDefinitions = this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
Just continue to analyze, check the source code:
public Set<BeanDefinitionHolder> parse(AnnotationAttributes componentScan, final String declaringClass) { Assert.state(this.environment != null, "Environment must not be null"); Assert.state(this.resourceLoader != null, "ResourceLoader must not be null"); ClassPathBeanDefinitionScanner scanner = new ClassPathBeanDefinitionScanner(this.registry, componentScan.getBoolean("useDefaultFilters"), this.environment, this.resourceLoader); Class<? extends BeanNameGenerator> generatorClass = componentScan.getClass("nameGenerator"); boolean useInheritedGenerator = (BeanNameGenerator.class == generatorClass); scanner.setBeanNameGenerator(useInheritedGenerator ? this.beanNameGenerator : BeanUtils.instantiateClass(generatorClass)); ScopedProxyMode scopedProxyMode = componentScan.getEnum("scopedProxy"); if (scopedProxyMode != ScopedProxyMode.DEFAULT) { scanner.setScopedProxyMode(scopedProxyMode); } else { Class<? extends ScopeMetadataResolver> resolverClass = componentScan.getClass("scopeResolver"); scanner.setScopeMetadataResolver(BeanUtils.instantiateClass(resolverClass)); } scanner.setResourcePattern(componentScan.getString("resourcePattern")); for (AnnotationAttributes filter : componentScan.getAnnotationArray("includeFilters")) { for (TypeFilter typeFilter : typeFiltersFor(filter)) { scanner.addIncludeFilter(typeFilter); } } for (AnnotationAttributes filter : componentScan.getAnnotationArray("excludeFilters")) { for (TypeFilter typeFilter : typeFiltersFor(filter)) { scanner.addExcludeFilter(typeFilter); } } boolean lazyInit = componentScan.getBoolean("lazyInit"); if (lazyInit) { scanner.getBeanDefinitionDefaults().setLazyInit(true); } Set<String> basePackages = new LinkedHashSet<String>(); String[] basePackagesArray = componentScan.getStringArray("basePackages"); for (String pkg : basePackagesArray) { String[] tokenized = StringUtils.tokenizeToStringArray(this.environment.resolvePlaceholders(pkg), ConfigurableApplicationContext.CONFIG_LOCATION_DELIMITERS); basePackages.addAll(Arrays.asList(tokenized)); } for (Class<?> clazz : componentScan.getClassArray("basePackageClasses")) { basePackages.add(ClassUtils.getPackageName(clazz)); } if (basePackages.isEmpty()) { basePackages.add(ClassUtils.getPackageName(declaringClass)); } scanner.addExcludeFilter(new AbstractTypeHierarchyTraversingFilter(false, false) { @Override protected boolean matchClassName(String className) { return declaringClass.equals(className); } }); return scanner.doScan(StringUtils.toStringArray(basePackages)); }
Another pile of code... On the whole, we can see that the first 95% of them set parameters for the following sentence:
ClassPathBeanDefinitionScanner scanner = new ClassPathBeanDefinitionScanner(this.registry,componentScan.getBoolean("useDefaultFilters"), this.environment, this.resourceLoader);
It's obvious that ClassPathBeanDefinitionScanner is really used to scan classes. The class annotation says "A bean definition scanner that detects bean candidates on the classpath". After that, it sets various name generators, scope s, resourcepatterns, include and exclude and lazy loading for scanners. It's not until the following time that we start to pay attention to the path:
Set<String> basePackages = new LinkedHashSet<String>(); String[] basePackagesArray = componentScan.getStringArray("basePackages"); for (String pkg : basePackagesArray) { String[] tokenized = StringUtils.tokenizeToStringArray(this.environment.resolvePlaceholders(pkg), ConfigurableApplicationContext.CONFIG_LOCATION_DELIMITERS); basePackages.addAll(Arrays.asList(tokenized)); } for (Class<?> clazz : componentScan.getClassArray("basePackageClasses")) { basePackages.add(ClassUtils.getPackageName(clazz)); } if (basePackages.isEmpty()) { basePackages.add(ClassUtils.getPackageName(declaringClass)); }
Get the basePackages we wrote in the annotation, set the environment path, and add them to the basePackages variable of the hashset type created before. Then set exclude filter to scanner. The last sentence is the core code.
return scanner.doScan(StringUtils.toStringArray(basePackages));
Here is the final real scan. Check the source code:
protected Set<BeanDefinitionHolder> doScan(String... basePackages) { Assert.notEmpty(basePackages, "At least one base package must be specified"); Set<BeanDefinitionHolder> beanDefinitions = new LinkedHashSet<BeanDefinitionHolder>(); for (String basePackage : basePackages) { Set<BeanDefinition> candidates = findCandidateComponents(basePackage); for (BeanDefinition candidate : candidates) { ScopeMetadata scopeMetadata = this.scopeMetadataResolver.resolveScopeMetadata(candidate); candidate.setScope(scopeMetadata.getScopeName()); String beanName = this.beanNameGenerator.generateBeanName(candidate, this.registry); if (candidate instanceof AbstractBeanDefinition) { postProcessBeanDefinition((AbstractBeanDefinition) candidate, beanName); } if (candidate instanceof AnnotatedBeanDefinition) { AnnotationConfigUtils.processCommonDefinitionAnnotations((AnnotatedBeanDefinition) candidate); } if (checkCandidate(beanName, candidate)) { BeanDefinitionHolder definitionHolder = new BeanDefinitionHolder(candidate, beanName); definitionHolder = AnnotationConfigUtils.applyScopedProxyMode(scopeMetadata, definitionHolder, this.registry); beanDefinitions.add(definitionHolder); registerBeanDefinition(definitionHolder, this.registry); } } } return beanDefinitions; }
for loops through basePackages, and then gets the beandefinitions under each BasePage through findCandidateComponents method. The next step is to configure each BeanDefinition.
Let's first see how the findCandidateComponents method source code makes these bean definitions:
public Set<BeanDefinition> findCandidateComponents(String basePackage) { Set<BeanDefinition> candidates = new LinkedHashSet<BeanDefinition>(); try { String packageSearchPath = ResourcePatternResolver.CLASSPATH_ALL_URL_PREFIX + resolveBasePackage(basePackage) + '/' + this.resourcePattern; Resource[] resources = this.resourcePatternResolver.getResources(packageSearchPath); boolean traceEnabled = logger.isTraceEnabled(); boolean debugEnabled = logger.isDebugEnabled(); for (Resource resource : resources) { if (traceEnabled) { logger.trace("Scanning " + resource); } if (resource.isReadable()) { try { MetadataReader metadataReader = this.metadataReaderFactory.getMetadataReader(resource); if (isCandidateComponent(metadataReader)) { ScannedGenericBeanDefinition sbd = new ScannedGenericBeanDefinition(metadataReader); sbd.setResource(resource); sbd.setSource(resource); if (isCandidateComponent(sbd)) { if (debugEnabled) { logger.debug("Identified candidate component class: " + resource); } candidates.add(sbd); } else { if (debugEnabled) { logger.debug("Ignored because not a concrete top-level class: " + resource); } } } else { if (traceEnabled) { logger.trace("Ignored because not matching any filter: " + resource); } } } catch (Throwable ex) { throw new BeanDefinitionStoreException( "Failed to read candidate component class: " + resource, ex); } } else { if (traceEnabled) { logger.trace("Ignored because not readable: " + resource); } } } } catch (IOException ex) { throw new BeanDefinitionStoreException("I/O failure during classpath scanning", ex); } return candidates; }
Here's a better way to understand. Maybe some of them have been written by themselves. The first obviously spell string, spell the path of the Resource file to be read finally, and then hand the file path to resourcePatternResolver to obtain a Resource class (inherited from InputStreamSource), which is an IO stream read.
The majority of this section is try catch, because there are many failures involved, which have been dealt with.
It mainly makes a filter judgment to determine whether you have exclude d some of them so that you can't read them. Then it reads out whether you have typed Component annotation. If the final conditions are met, the information read out will be added to the final LinkedHashSet set set and returned.
After reading all, return to the upper doScan method here:
Set<BeanDefinition> candidates = findCandidateComponents(basePackage); for (BeanDefinition candidate : candidates) { ScopeMetadata scopeMetadata = this.scopeMetadataResolver.resolveScopeMetadata(candidate); candidate.setScope(scopeMetadata.getScopeName()); String beanName = this.beanNameGenerator.generateBeanName(candidate, this.registry); if (candidate instanceof AbstractBeanDefinition) { postProcessBeanDefinition((AbstractBeanDefinition) candidate, beanName); } if (candidate instanceof AnnotatedBeanDefinition) { AnnotationConfigUtils.processCommonDefinitionAnnotations((AnnotatedBeanDefinition) candidate); } if (checkCandidate(beanName, candidate)) { BeanDefinitionHolder definitionHolder = new BeanDefinitionHolder(candidate, beanName); definitionHolder = AnnotationConfigUtils.applyScopedProxyMode(scopeMetadata, definitionHolder, this.registry); beanDefinitions.add(definitionHolder); registerBeanDefinition(definitionHolder, this.registry); } }
Set the scope for the scanned BeanDefinition, make a name for the BeanDefinition, and judge whether it is configured in the form of annotation or XML. For example, the default lazy load settings are various. spring has the default or read your settings. Finally, the BeanDefinition and the name are packaged as BeanDefinitionHolder through:
BeanDefinitionHolder definitionHolder = new BeanDefinitionHolder(candidate, beanName); definitionHolder=AnnotationConfigUtils.applyScopedProxyMode(scopeMetadata,definitionHolder, this.registry); beanDefinitions.add(definitionHolder); registerBeanDefinition(definitionHolder, this.registry);
Finally, register bean definition is registered in the container. To tell you the truth, I'm curious about how to register and keep opening the source code:
public void registerBeanDefinition(String beanName, BeanDefinition beanDefinition) throws BeanDefinitionStoreException { Assert.hasText(beanName, "Bean name must not be empty"); Assert.notNull(beanDefinition, "BeanDefinition must not be null"); if (beanDefinition instanceof AbstractBeanDefinition) { try { ((AbstractBeanDefinition) beanDefinition).validate(); } catch (BeanDefinitionValidationException ex) { throw new BeanDefinitionStoreException(beanDefinition.getResourceDescription(), beanName, "Validation of bean definition failed", ex); } } BeanDefinition oldBeanDefinition; oldBeanDefinition = this.beanDefinitionMap.get(beanName); if (oldBeanDefinition != null) { if (!isAllowBeanDefinitionOverriding()) { throw new BeanDefinitionStoreException(beanDefinition.getResourceDescription(), beanName, "Cannot register bean definition [" + beanDefinition + "] for bean '" + beanName + "': There is already [" + oldBeanDefinition + "] bound."); } else if (oldBeanDefinition.getRole() < beanDefinition.getRole()) { // e.g. was ROLE_APPLICATION, now overriding with ROLE_SUPPORT or ROLE_INFRASTRUCTURE if (this.logger.isWarnEnabled()) { this.logger.warn("Overriding user-defined bean definition for bean '" + beanName + "' with a framework-generated bean definition: replacing [" + oldBeanDefinition + "] with [" + beanDefinition + "]"); } } else if (!beanDefinition.equals(oldBeanDefinition)) { if (this.logger.isInfoEnabled()) { this.logger.info("Overriding bean definition for bean '" + beanName + "' with a different definition: replacing [" + oldBeanDefinition + "] with [" + beanDefinition + "]"); } } else { if (this.logger.isDebugEnabled()) { this.logger.debug("Overriding bean definition for bean '" + beanName + "' with an equivalent definition: replacing [" + oldBeanDefinition + "] with [" + beanDefinition + "]"); } } this.beanDefinitionMap.put(beanName, beanDefinition); } else { if (hasBeanCreationStarted()) { // Cannot modify startup-time collection elements anymore (for stable iteration) synchronized (this.beanDefinitionMap) { this.beanDefinitionMap.put(beanName, beanDefinition); List<String> updatedDefinitions = new ArrayList<String>(this.beanDefinitionNames.size() + 1); updatedDefinitions.addAll(this.beanDefinitionNames); updatedDefinitions.add(beanName); this.beanDefinitionNames = updatedDefinitions; if (this.manualSingletonNames.contains(beanName)) { Set<String> updatedSingletons = new LinkedHashSet<String>(this.manualSingletonNames); updatedSingletons.remove(beanName); this.manualSingletonNames = updatedSingletons; } } } else { // Still in startup registration phase this.beanDefinitionMap.put(beanName, beanDefinition); this.beanDefinitionNames.add(beanName); this.manualSingletonNames.remove(beanName); } this.frozenBeanDefinitionNames = null; } if (oldBeanDefinition != null || containsSingleton(beanName)) { resetBeanDefinition(beanName); } }
For a long time, it's actually about some verification and the processing of bean definition with the same name. The core is as follows:
this.beanDefinitionMap.put(beanName, beanDefinition);
View the bean definition map
private final Map<String, BeanDefinition> beanDefinitionMap = new ConcurrentHashMap<String, BeanDefinition>(256);
It's a ConcurrentHashMap, a private member variable in the DefaultListableBeanFactory class, so we can also see the importance of the DefaultListableBeanFactory class. BeanDefinition exists in it. Container.
ok, as soon as we get to the end, let's go back to the upper layer.
Back to the doProcessConfigurationClass method of the ConfigurationClassParser class, it is the parsing of various annotations started in this method:
// Process any @ComponentScan annotations Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable( sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class); if (!componentScans.isEmpty() && !this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) { for (AnnotationAttributes componentScan : componentScans) { // The config class is annotated with @ComponentScan -> perform the scan immediately Set<BeanDefinitionHolder> scannedBeanDefinitions = this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName()); // Check the set of scanned definitions for any further config classes and parse recursively if needed for (BeanDefinitionHolder holder : scannedBeanDefinitions) { if (ConfigurationClassUtils.checkConfigurationClassCandidate( holder.getBeanDefinition(), this.metadataReaderFactory)) { parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName()); } } } }
We were right here before:
Set<BeanDefinitionHolder> scannedBeanDefinitions = this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
As we continue to dig deeper, let's look down:
for (BeanDefinitionHolder holder : scannedBeanDefinitions) { if (ConfigurationClassUtils.checkConfigurationClassCandidate( holder.getBeanDefinition(), this.metadataReaderFactory)) { parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName()); } }
Here is to check whether the class swept out by ComponentScan is annotated with ComponentScan again, which may require recursive parsing.
OK, then we will analyze the source code of @ ComponentScan.
There are other annotation parsing in this method. For example, the example we gave at the beginning of this series: configuring beans through Java classes is the @ Bean annotation. Let's take a look at @ Bean annotation.
@Bean source code
// Process individual @Bean methods Set<MethodMetadata> beanMethods = retrieveBeanMethodMetadata(sourceClass); for (MethodMetadata methodMetadata : beanMethods) { configClass.addBeanMethod(new BeanMethod(methodMetadata, configClass)); }
Here, open the addBeanMethod method:
public void addBeanMethod(BeanMethod method) { this.beanMethods.add(method); }
beanMehtods is a private final Set beanMethods = new LinkedHashSet();
I feel like I didn't do anything, I just added it. You can only see what retrieveBeanMethodMetadata is doing. Open:
private Set<MethodMetadata> retrieveBeanMethodMetadata(SourceClass sourceClass) { AnnotationMetadata original = sourceClass.getMetadata(); Set<MethodMetadata> beanMethods = original.getAnnotatedMethods(Bean.class.getName()); if (beanMethods.size() > 1 && original instanceof StandardAnnotationMetadata) { // Try reading the class file via ASM for deterministic declaration order... // Unfortunately, the JVM's standard reflection returns methods in arbitrary // order, even between different runs of the same application on the same JVM. try { AnnotationMetadata asm = this.metadataReaderFactory.getMetadataReader(original.getClassName()).getAnnotationMetadata(); Set<MethodMetadata> asmMethods = asm.getAnnotatedMethods(Bean.class.getName()); if (asmMethods.size() >= beanMethods.size()) { Set<MethodMetadata> selectedMethods = new LinkedHashSet<MethodMetadata>(asmMethods.size()); for (MethodMetadata asmMethod : asmMethods) { for (MethodMetadata beanMethod : beanMethods) { if (beanMethod.getMethodName().equals(asmMethod.getMethodName())) { selectedMethods.add(beanMethod); break; } } } if (selectedMethods.size() == beanMethods.size()) { // All reflection-detected methods found in ASM method set -> proceed beanMethods = selectedMethods; } } } catch (IOException ex) { logger.debug("Failed to read class file via ASM for determining @Bean method order", ex); // No worries, let's continue with the reflection metadata we started with... } } return beanMethods; }
It seems that there is nothing to do here, that is to take out the Bean annotated method return in the configuration class and do nothing. So where is the creation object in the @ Bean annotation created and added to the container?
This is obviously a pre operation. Then the real operation is after the upper layer call (in fact, only @ ComponentScan handles the parse method). We return to the upper layer until there is a parse method: go to the processConfigBeanDefinitions method of ConfigurationClassPostProcessor:
public void processConfigBeanDefinitions(BeanDefinitionRegistry registry) { List<BeanDefinitionHolder> configCandidates = new ArrayList<BeanDefinitionHolder>(); String[] candidateNames = registry.getBeanDefinitionNames(); for (String beanName : candidateNames) { BeanDefinition beanDef = registry.getBeanDefinition(beanName); if (ConfigurationClassUtils.isFullConfigurationClass(beanDef) || ConfigurationClassUtils.isLiteConfigurationClass(beanDef)) { if (logger.isDebugEnabled()) { logger.debug("Bean definition has already been processed as a configuration class: " + beanDef); } } else if (ConfigurationClassUtils.checkConfigurationClassCandidate(beanDef, this.metadataReaderFactory)) { configCandidates.add(new BeanDefinitionHolder(beanDef, beanName)); } } // Return immediately if no @Configuration classes were found if (configCandidates.isEmpty()) { return; } // Sort by previously determined @Order value, if applicable Collections.sort(configCandidates, new Comparator<BeanDefinitionHolder>() { @Override public int compare(BeanDefinitionHolder bd1, BeanDefinitionHolder bd2) { int i1 = ConfigurationClassUtils.getOrder(bd1.getBeanDefinition()); int i2 = ConfigurationClassUtils.getOrder(bd2.getBeanDefinition()); return (i1 < i2) ? -1 : (i1 > i2) ? 1 : 0; } }); // Detect any custom bean name generation strategy supplied through the enclosing application context SingletonBeanRegistry sbr = null; if (registry instanceof SingletonBeanRegistry) { sbr = (SingletonBeanRegistry) registry; if (!this.localBeanNameGeneratorSet && sbr.containsSingleton(CONFIGURATION_BEAN_NAME_GENERATOR)) { BeanNameGenerator generator = (BeanNameGenerator) sbr.getSingleton(CONFIGURATION_BEAN_NAME_GENERATOR); this.componentScanBeanNameGenerator = generator; this.importBeanNameGenerator = generator; } } // Parse each @Configuration class ConfigurationClassParser parser = new ConfigurationClassParser( this.metadataReaderFactory, this.problemReporter, this.environment, this.resourceLoader, this.componentScanBeanNameGenerator, registry); Set<BeanDefinitionHolder> candidates = new LinkedHashSet<BeanDefinitionHolder>(configCandidates); Set<ConfigurationClass> alreadyParsed = new HashSet<ConfigurationClass>(configCandidates.size()); do { parser.parse(candidates); parser.validate(); Set<ConfigurationClass> configClasses = new LinkedHashSet<ConfigurationClass>(parser.getConfigurationClasses()); configClasses.removeAll(alreadyParsed); // Read the model and create bean definitions based on its content if (this.reader == null) { this.reader = new ConfigurationClassBeanDefinitionReader( registry, this.sourceExtractor, this.resourceLoader, this.environment, this.importBeanNameGenerator, parser.getImportRegistry()); } this.reader.loadBeanDefinitions(configClasses); alreadyParsed.addAll(configClasses); candidates.clear(); if (registry.getBeanDefinitionCount() > candidateNames.length) { String[] newCandidateNames = registry.getBeanDefinitionNames(); Set<String> oldCandidateNames = new HashSet<String>(Arrays.asList(candidateNames)); Set<String> alreadyParsedClasses = new HashSet<String>(); for (ConfigurationClass configurationClass : alreadyParsed) { alreadyParsedClasses.add(configurationClass.getMetadata().getClassName()); } for (String candidateName : newCandidateNames) { if (!oldCandidateNames.contains(candidateName)) { BeanDefinition bd = registry.getBeanDefinition(candidateName); if (ConfigurationClassUtils.checkConfigurationClassCandidate(bd, this.metadataReaderFactory) && !alreadyParsedClasses.contains(bd.getBeanClassName())) { candidates.add(new BeanDefinitionHolder(bd, candidateName)); } } } candidateNames = newCandidateNames; } } while (!candidates.isEmpty()); // Register the ImportRegistry as a bean in order to support ImportAware @Configuration classes if (sbr != null) { if (!sbr.containsSingleton(IMPORT_REGISTRY_BEAN_NAME)) { sbr.registerSingleton(IMPORT_REGISTRY_BEAN_NAME, parser.getImportRegistry()); } } if (this.metadataReaderFactory instanceof CachingMetadataReaderFactory) { ((CachingMetadataReaderFactory) this.metadataReaderFactory).clearCache(); } }
Let's just look around and after the parse method of the source code. There is a do while loop to parse that:
do { parser.parse(candidates); parser.validate(); Set<ConfigurationClass> configClasses = new LinkedHashSet<ConfigurationClass>(parser.getConfigurationClasses()); configClasses.removeAll(alreadyParsed); // Read the model and create bean definitions based on its content if (this.reader == null) { this.reader = new ConfigurationClassBeanDefinitionReader( registry, this.sourceExtractor, this.resourceLoader, this.environment, this.importBeanNameGenerator, parser.getImportRegistry()); } this.reader.loadBeanDefinitions(configClasses); alreadyParsed.addAll(configClasses); candidates.clear(); if (registry.getBeanDefinitionCount() > candidateNames.length) { String[] newCandidateNames = registry.getBeanDefinitionNames(); Set<String> oldCandidateNames = new HashSet<String>(Arrays.asList(candidateNames)); Set<String> alreadyParsedClasses = new HashSet<String>(); for (ConfigurationClass configurationClass : alreadyParsed) { alreadyParsedClasses.add(configurationClass.getMetadata().getClassName()); } for (String candidateName : newCandidateNames) { if (!oldCandidateNames.contains(candidateName)) { BeanDefinition bd = registry.getBeanDefinition(candidateName); if (ConfigurationClassUtils.checkConfigurationClassCandidate(bd, this.metadataReaderFactory) && !alreadyParsedClasses.contains(bd.getBeanClassName())) { candidates.add(new BeanDefinitionHolder(bd, candidateName)); } } } candidateNames = newCandidateNames; } } while (!candidates.isEmpty());
parser.parse(candidates); followed by a Set of checksums to create configuration classes. Note that there is one way:
this.reader.loadBeanDefinitions(configClasses);
The load bean definitions of this operation reader are close to the meaning. Click here to have a look:
/** * Read {@ code configurationModel}, and register the bean definition in the registry according to its content. */ public void loadBeanDefinitions(Set<ConfigurationClass> configurationModel) { TrackedConditionEvaluator trackedConditionEvaluator = new TrackedConditionEvaluator(); for (ConfigurationClass configClass : configurationModel) { loadBeanDefinitionsForConfigurationClass(configClass, trackedConditionEvaluator); } }
This note is very obvious. Continue to follow up loadBeanDefinitionsForConfigurationClass:
/** * Read a particular {@link ConfigurationClass}, registering bean definitions * for the class itself and all of its {@link Bean} methods. */ private void loadBeanDefinitionsForConfigurationClass(ConfigurationClass configClass, TrackedConditionEvaluator trackedConditionEvaluator) { if (trackedConditionEvaluator.shouldSkip(configClass)) { String beanName = configClass.getBeanName(); if (StringUtils.hasLength(beanName) && this.registry.containsBeanDefinition(beanName)) { this.registry.removeBeanDefinition(beanName); } this.importRegistry.removeImportingClass(configClass.getMetadata().getClassName()); return; } if (configClass.isImported()) { registerBeanDefinitionForImportedConfigurationClass(configClass); } for (BeanMethod beanMethod : configClass.getBeanMethods()) { loadBeanDefinitionsForBeanMethod(beanMethod); } loadBeanDefinitionsFromImportedResources(configClass.getImportedResources()); loadBeanDefinitionsFromRegistrars(configClass.getImportBeanDefinitionRegistrars()); }
Notice that there is an important point:
for (BeanMethod beanMethod : configClass.getBeanMethods()) { loadBeanDefinitionsForBeanMethod(beanMethod); }
This is too obvious. Take out the configured bean methods, load them one by one, and continue to follow up:
/** * Read the given {@link BeanMethod}, registering bean definitions * with the BeanDefinitionRegistry based on its contents. */ private void loadBeanDefinitionsForBeanMethod(BeanMethod beanMethod) { ConfigurationClass configClass = beanMethod.getConfigurationClass(); MethodMetadata metadata = beanMethod.getMetadata(); String methodName = metadata.getMethodName(); // Do we need to mark the bean as skipped by its condition? if (this.conditionEvaluator.shouldSkip(metadata, ConfigurationPhase.REGISTER_BEAN)) { configClass.skippedBeanMethods.add(methodName); return; } if (configClass.skippedBeanMethods.contains(methodName)) { return; } // Consider name and any aliases AnnotationAttributes bean = AnnotationConfigUtils.attributesFor(metadata, Bean.class); List<String> names = new ArrayList<String>(Arrays.asList(bean.getStringArray("name"))); String beanName = (!names.isEmpty() ? names.remove(0) : methodName); // Register aliases even when overridden for (String alias : names) { this.registry.registerAlias(beanName, alias); } // Has this effectively been overridden before (e.g. via XML)? if (isOverriddenByExistingDefinition(beanMethod, beanName)) { return; } ConfigurationClassBeanDefinition beanDef = new ConfigurationClassBeanDefinition(configClass, metadata); beanDef.setResource(configClass.getResource()); beanDef.setSource(this.sourceExtractor.extractSource(metadata, configClass.getResource())); if (metadata.isStatic()) { // static @Bean method beanDef.setBeanClassName(configClass.getMetadata().getClassName()); beanDef.setFactoryMethodName(methodName); } else { // instance @Bean method beanDef.setFactoryBeanName(configClass.getBeanName()); beanDef.setUniqueFactoryMethodName(methodName); } beanDef.setAutowireMode(RootBeanDefinition.AUTOWIRE_CONSTRUCTOR); beanDef.setAttribute(RequiredAnnotationBeanPostProcessor.SKIP_REQUIRED_CHECK_ATTRIBUTE, Boolean.TRUE); AnnotationConfigUtils.processCommonDefinitionAnnotations(beanDef, metadata); Autowire autowire = bean.getEnum("autowire"); if (autowire.isAutowire()) { beanDef.setAutowireMode(autowire.value()); } String initMethodName = bean.getString("initMethod"); if (StringUtils.hasText(initMethodName)) { beanDef.setInitMethodName(initMethodName); } String destroyMethodName = bean.getString("destroyMethod"); if (destroyMethodName != null) { beanDef.setDestroyMethodName(destroyMethodName); } // Consider scoping ScopedProxyMode proxyMode = ScopedProxyMode.NO; AnnotationAttributes attributes = AnnotationConfigUtils.attributesFor(metadata, Scope.class); if (attributes != null) { beanDef.setScope(attributes.getString("value")); proxyMode = attributes.getEnum("proxyMode"); if (proxyMode == ScopedProxyMode.DEFAULT) { proxyMode = ScopedProxyMode.NO; } } // Replace the original bean definition with the target one, if necessary BeanDefinition beanDefToRegister = beanDef; if (proxyMode != ScopedProxyMode.NO) { BeanDefinitionHolder proxyDef = ScopedProxyCreator.createScopedProxy( new BeanDefinitionHolder(beanDef, beanName), this.registry, proxyMode == ScopedProxyMode.TARGET_CLASS); beanDefToRegister = new ConfigurationClassBeanDefinition( (RootBeanDefinition) proxyDef.getBeanDefinition(), configClass, metadata); } if (logger.isDebugEnabled()) { logger.debug(String.format("Registering bean definition for @Bean method %s.%s()", configClass.getMetadata().getClassName(), beanName)); } this.registry.registerBeanDefinition(beanName, beanDefToRegister); }
Through the method annotation, it is more certain that the last code is the container registration code.
Let's take a look. The first three sentences are to take out configuration class, method data and method name. The next two decisions are to see if you want to skip. Skip and return directly. Do not register. Next, take out the value corresponding to the name in the @ Bean annotation, that is, take out the alias and register it, and then take out all kinds of things in the @ Bean annotation. autowire model (through id or name?), initMethod, destroyMethod, and various details of configuration are not enough. Finally, register in through this.registry.registerBeanDefinition.
It's worth noting that beanName comes from:
List<String> names = new ArrayList<String(Arrays.asList(bean.getStringArray("name"))); String beanName = (!names.isEmpty() ? names.remove(0) : methodName);
In other words, when your @ Bean annotation doesn't write name, the default is to use the method name as the beanName!
So far, the @ Bean annotation has been analyzed.
So far, in the three methods of ioc constructor, refresh(), the part of invokeBeanFactoryPostProcessors is finished, and the rest of the next article continues to analyze.